|
 Mate’s ValuGrind™ Tool Grinding System regrinds punches and dies to maintain optimum condition for the highest quality punch press fabrication.
ValuGrind accomodates both Thick Turret A-E station, Multi Tool and Trumpf style size 1 and 2 tooling. Customized to your requirements, you select the model based on fixture style and electrical wiring needs.
- Affordable
- Compact overall size
32.28(820.0) Length
20.47(520.0) Width
26.57(675.0) Height
- Superior finish of ground surfaces
- Simple and safe operation
- Low maintenance and low operation costs
- Easy tool set up
- Easy installation
Thick Turret |
ULTRA
TEC® |
Ultra XT™ |
Original
Style |
MXC™ |
AMX™ |
MTG™ |
MT™ |
|
A - 1/2”
B - 1-1/4”
C - 2”
D - 3-1/2”
E - 4-1/2” |
A - 1/2”
B - 1-1/4”
C - 2”
D - 3-1/2”
E - 4-1/2” |
A - 1/2”
B - 1-1/4”
C - 2”
D - 3-1/2”
E - 4-1/2” |
A - 1/2”
B - 1-1/4”
C - 2”
D - 3-1/2”
E - 4-1/2” |
A - 1/2”
B - 1-1/4”
C - 2”
D - 3-1/2”
E - 4-1/2” |
3 station
8 station
8 station- long |
8 mm
16 mm
24 mm |
Trumpf Style |
NEXT™ |
QuickLock™ |
Standard
Style |
Multi Tool |
|
|
Size 40
Size 76 |
Size 1
Size 1 |
Size 0-A
Size 0-B
Size 1
Size 1-X
Size 2
Size 3 |
3 station
4 station
5 station
6 station
10 station |
<top>
Mate ValuGrind™ provides:
A superior grinding finish and ground surface flatness with its:
- Belt drive that ensures optimum wheel RPM
- Large diamond grinding wheel with inner cooled cup-style design that delivers coolant exactly where needed to prevent burning or discoloration
- Rigid and robust design
Faster grinding of larger tools because it comes with a:
- Large motor that can accommodate up to Thick Turret E-station dies
- Large grinding wheel 6.46(165,0)
No need for any wiring changes before use:
- Electrical configurations available to fit your local needs in any country so it is ready to plug in and begin grinding*
Quick setup for grinding tools, and the flexibility to grind anything that will fit on its magnetic base.
Minimal maintenance:
- Manufactured with quality components like Siemens electric motors
- Uses diamond grinding wheels that do not need to be dressed
- Coolant screens that greatly reduce the amount of grinding swarf and allow for easier cleaning
Easy to use operation:
- Portable tabletop design can be used virtually anywhere, even if space is limited
- Pre-fixtured to grind all of Mate’s Thick Turret or Trumpf style tools
- Easy to expand tool style grinding capability by simply purchasing other available fixture sets
- All you need to do is unpack it, add coolant, plug it in and grind
Safe to use operation:
- Sturdy construction so it will not move or tip when in use
- Minimally exposed grinding wheel and safety stop button
- Tinted polycarbonate safety shield
- Diffuser-lined tub walls to keep coolant splatter to a minimum
<top>
Tool Style |
Voltage |
Phase |
Hertz |
Plug Style* |
Part Number |
Thick Turret |
208 V |
3 |
50/60 Hz |
20 amp |
MATE01946 |
Trumpf style |
208 V |
3 |
50/60 Hz |
20 amp |
MATE01947 |
Thick Turret |
400 V |
3 |
50/60 Hz |
16 amp |
MATE01948 |
Trumpf style |
400 V |
3 |
50/60 Hz |
16 amp |
MATE01949 |
Each ValuGrind System includes grinding fixture set for tool style selected.
* Any changes necessary to the plug style are the responsibility of the end user and need to be done by a certified electrician.
 |
 |
 |
 |
| Thick Turret & MT Style Fixture Sets |
Trumpf Style Fixture Set |
16 amp Plug
20 amp Plug |
| illustrations for reference only. Actual fixtures may be slightly different. |
<top>
Dimensions: |
Length |
32.28(820.0) |
| Width |
20.47(520.0) |
| Height |
26.57(675.0) |
Weight |
330.69 lb/150 kg |
Nominal voltage |
3/N/PE AC 400/230V |
Nominal frequency |
50 Hz (60 Hz) |
Nominal current |
max. 2,2 A |
Power output |
1050 W |
Degree of protection |
min. IP 54 |
Grinding Wheel RPM |
3000 / min |
Working travel of the spindle |
2.20(56.0) |
Working travel scale division |
0.078(0.02) |
Angular displacement of the arm |
180° |
Grinding wheel: |
Identification |
12-150-2/6-50 |
| Quality |
B-IIIA; B 151; K75 |
| Diameter |
6.49(165.0) |
Die Diameter |
max. 6.29(160.0) |
Die Height |
max. 1.57(40.0) |
Maximum length of punches A and B |
8.18(208.0) |
Maximum length of punches B, C and D |
3.81(97.0) |
Punch Shank Diameter |
max. 4.76(121.0) |
Height Adjustment Graduations |
0.078(0.02) |
Shear Angle |
0°-8° |
Recommended coolant: |
Type |
P3 Multan 41-30 |
| Dilution |
1:30 |
| Volume |
About 6 litres |
Level of sound pressure acting on standing operator (measured in accordance with EN 11204) |
75 dB |
Weighted effective value of vibration acceleration (in accordance with ISO 5349 at grinding) |
2,5 m/s2 |
Warranty |
12 month limited |
<top> |
