|
Mate offers the most comprehensive range
of tooling systems designed to accommodate any punching
application in your Trumpf style punch press. The following
overview will help you determine which tooling system
is right for your typical punching application.
The Mate Trumpf Style Tooling System is
designed to enable fabricators to produce high quality
piece parts, with economy. Features include:
Standard Duty System
- Alignment Ring: Shock-resistant
tool steel for maximum accuracy and durability.
- Punches: Abrasion resistant High-Speed-Steel
for increased tool life. 1/4-degree back taper for
improved stripping performance.
- Urethane Strippers: For reduced
punching noise and elimination of sheet marking.
- Metal Strippers: High-strength
tool steel for superior strength and flatness.
- Dies: Wear-resistant tool steel
with uniform corner clearance radii for improved die
strength and enhanced piece part quality.
Heavy Duty System
- Punches: HSS with
2-degree back taper for improved stripping and reinforced
shoulder for improved punching force distribution.
- Dies: Shock-resistant tool steel specially
formulated for high impact shock resistance.
- Alignment Ring: shock-resistant tool
steel, precision ground to fit heavy duty punch.
Visit mate.com/trumpfstandard
for more information.
 
The Mate QuickLock™ tooling system
for Trumpf style presses combines the economy of conventional
Trumpf style tooling with the convenience of alignment
via a keyed alignment ring. The keyed alignment ring
engages the alignment key in the punch for quick tool
alignment without an alignment fixture. This results
in quicker tool set-ups and increased machine productivity.
Features include:
- High-Speed Steel punches, with 1/4
degree back taper and near polished flanks for extended
interval between regrinds.
- Punches include an alignment key for
use with the Mate QuickLock alignment ring.
- Alignment ring with a keyway that engages
the key on both Mate QuickLock size 1 and size 2 punches
for quick and accurate tool alignment.
- Urethane strippers, in an extended
size range, for quieter operation and improved piece
part quality. Available as push-on or screw-on, depending
on punch point size.
- Highly wear-resistant punches and dies
for maximum productivity.
- Slug Free® dies available.
Visit mate.com/quicklock
for more information.
The Mate NEXT™ Insert Tooling System
for Trumpf style presses, is a high performance tooling
system designed to maximize tool life, minimize tool
set-up times, improve accuracy, reduce punching costs,
and maximize productivity. The Mate NEXT Insert Tooling
System includes:
- Two sizes of insert punch holders with
precision orientation features for quick tool change
without alignment fixtures.
- Size 40: 0.031(0.80) to 1.575(40.00)
- Size 76: 1.575(40.00) to 3.000(76.20)
- Interchangeable, highly abrasion-resistant,
punch inserts for exceptional interval between regrinds.
Size 40 punch inserts use exclusive M4PM™ tool
steel. For longest tool life.
- Precision ground shims which return
the punch insert to the original length after 0.118(3.00)
has been removed during regrinding.
- Push-on urethane stripper for Size
40 punch holders provide positive on-the-die stripping
without marking. Ideal for decorative material.
- Full compatibility with existing metal
strippers and dies for maximum flexibility.
Visit mate.com/NEXT
for more information.
|
