Thank you for your interest in the Mate Sheetmarker™ tool. The Sheetmarker tool is used to create markings or etchings on the surface of sheet metal. The Mate Sheetmarker tool is ideal for inscribing or marking components during the punch press portion of the manufacturing process
Mate Sheetmarker is available in popular tool styles including: Ultraform for thick turret, thin turret, 112/114, and Trumpf.
The tool uses a spring loaded diamond pointed insert to scribe the surface of the sheet to create the marking. The marking is the result of programs created in the punch press programming system. This can include logos, part number, serial numbers, instructions etc.
Maximum Versatility:
Each Sheetmarker kit is supplied with two diamond pointed inserts (120 degree point and 150 degree point) and three springs (light pressure, medium pressure, heavy pressure). The combination of insert point angle and spring pressure allows a wide variety of results to be achieved for maximum versitility. See table.
Desired Result
Material to be Cut
Diamond Insert
Spring Color
Sheet Movement Speed
Inches per minute
(mm per minute)
Light etching
Mild Steel
120 °
Zinc (light )
750(19000)
Bold etching
Mild Steel
120 °
Zinc (light )
750(19000)
Light groove
Mild Steel
120 °
Green (medium )
500(12700)
Bold groove
Mild Steel
120 °
Red (heavy )
500(12700)
Light etching
Stainless Steel
120 °
Zinc (light )
750(19000)
Bold etching
Stainless Steel
120 °
Zinc (light )
750(19000)
Light groove
Stainless Steel
120 °
Green (medium )
500(12700)
Bold groove
Stainless Steel
120 °
Red (heavy )
250(6350)
Light etching
Galvanized Steel
150 °
Zinc (light )
750(19000)
Medium etching
Galvanized Steel
150 °
Zinc (light )
750(19000)
Medium etching
Aluminum
150 °
Zinc (light )
750(19000)
Bold etching
Aluminum
150 °
Zinc (light )
750(19000)
Bold etching
Aluminum
150 °
Green (medium )
750(19000)
Brass Inserts
Mate Sheetmarker tools can also be used to cut the protective film found on many materials including aluminum and stainless steel. This is useful to expose localized areas of the sheet metal, without damage to the underlying material, while leaving the remainder of the sheet fully protected. This innovative application is achieved by replacing the diamond insert with a brass insert.
The localized removal of protective film is useful for many applications including:
Exposing areas which require secondary welding, spot welding or bonding operations.
Exposing areas to be laser cut.
Allowing fasteners to be fitted without interference.
Providing ideal sheet metal conditions for subsequent V-line stamp or Sheetmarker operations.
The brass insert is machined to a point which is sharp enough to cut the plastic film but will not damage the sheet metal beneath it. The combined reliability of the punch press and the precision of the Sheetmarker assure the consistent production of high quality piece parts.
Mate Sheetmarker is suitable for machines with control mechanisms that allow the sheet to be moved in both the X-axis and Y-axis, while the ram is held down.
ate Sheetmarker is another innovative product designed to expand the punch press user’s capabilities. Incorporating more elements into sheet metal components at the punch press, allows the fabricator to deliver greater added value, and become more competitive in today’s global marketplace.
