Salvagnini Style Type II and Type III Tooling

Because Mate is the Original Equipment Manufacturer for Salvagnini America, Mate's high speed steel punches, dies and strippers compliment Salvagnini's high performance punching system like no other. Mate's complete range of standards, special shapes and forming assemblies available to customer specifications expand Salvagnini's complete metal fabricating system to the fullest.

 

 

Salvagnini Type III

Salvagnini Type II

Salvagini Type III Tooling available in the following station sizes:
Salvagnini Positions

Station Size

Comments

1-20 and 41-76 (7 Ton)

6mm Size

Rounds Only

10.5mm Size

Rounds Only

33mm Size

 

33mm Size (diagonal up to 1.023(26.00)

Fully Guided Perforating Assembly

30-35 (12 Ton)

60mm

 

60mm

Auto-Index

21-24 (26 Ton)

70x90 Size

Type 70 (3.1)

90x90 Size

Type 90 (3.0)

Punches:

  • Premium Powdered Metal Based High Speed Steel - incredibly long tool life under even the most extreme punching conditions.
  • High abrasion resistance, high anti-galling properties, plus excellent hot and red hardness.
  • Fully guided perforating tool has punch size range to 26mm.
  • A punch chuck is available for punch sizes 10.5mm and under.
  • Punches can be resharpened up to 0.157”(4.00mm) and dies to 0.060”(1.50mm), yielding many additional spans of production. An infinite variety of special shape punches can be made to your specifications.
Strippers:
  • Stripper openings are precise to match punch dimensions.
  • Fully guided perforating stripper has unique design to support punch point throughout the punching cycle.
  • The stripper is assembled into the upper cartridge.
Die:
  • High speed steel dies in 33mm stations (A, B and C).
  • A wide variety of special shapes are available to a clearance of your choice, as well as standard shapes.
  • Specify die clearance as punch size PLUS total clearance, NOT as clearance per side.
  • Brushes in D, E and F stations prevent marking.
  • Slug Free® dies are available as an option for all Type III stations at no additional cost.

Salvagnini III Catalog ( 717 kb )

Salvagnini III Catalog ( 3.2 mb ) - Technical data

< top >

Salvagnini Type II Tooling available in the following station sizes:

Salvagnini Positions Station Size Comments
1-20 (6 Ton) 6mm Size Rounds Only
10.5mm Size Rounds Only
33mm Size  
30-35 (6.5 Ton) 60mm PR Stations
21 and 23 (18 Ton) 90x90 Size  
28 (18 Ton) 3.976(101.00) Square Only

Punches:

  • High Speed Steel - long tool life under even the most extreme punching conditions.
  • High abrasion resistance, high anti-galling properties, plus excellent hot and red hardness.
  • A punch chuck is available for punch sizes 10.5mm and under.
  • Punches can be resharpened up to 0.157(4.00) and dies to 0.060(1.50), yielding many additional spans of production. An infinite variety of special shape punches can be made to your specifications.
Strippers:
  • Stripper openings are precise to match punch dimensions.
  • The stripper is assembled into the upper cartridge.
Die:
  • High speed steel dies in 33mm stations (A, B and C).
  • A wide variety of special shapes are available to a clearance of your choice, as well as standard shapes.
  • Specify die clearance as punch size PLUS total clearance, NOT as clearance per side.
  • Slug Free® dies are available as an option for all Type III stations at no additional cost.
Salvagnini II Catalog (187 kb)

< top >

Dimensions in inches(millimeters).