| Punch
Point Range: 0.030(0.80) to 0.945(24.00)
Punches: Premium
high speed tool steel for exceptional interval
between regrinds. 1/4 degree back taper and near
polished flanks to reduce friction and eliminate
galling. Minute corner radii to reduce chipping.
Hardened and ground D shaped pin for precise
punch orientation.
Strippers: Hardened
for less wear and resistance to punch galling.
Tight clearance for better punch guiding; 0.001(0.04)
for shapes, 0.002(0.06) for rounds.
Dies: Highly
wear resistant, chrome air hardened tool steel
with optimum balance between hardness and toughness.
SLUG FREE® die geometry eliminates slug pulling.
Uniform clearance radii in die corners to improve
piece part quality. Shaped dies keyed. 0.059(1.50)
grind life, with shims also available. Superior
roundness and flatness with exceptional die strength.
Download XMT product bulletin ( 197 kb ) |
