|
 Mate's XMT™ Tooling System is the world's first and only tooling designed specifically for Euromac punch presses. Mate's status as Original Equipment Manufacturer for Euromac makes XMT™ tooling the only way to take full advantage of the capabilities of the Euromac XMTE4, XMTE6 and XMTE10 Multi Tool punch holders..
- 2x XMT 24mm round or shaped multi tool punches, strippers, and Slug Free® dies
- 4x XMT 12.7mm round or shaped multi tool punches, strippers, and Slug Free® dies
- 4x XMT 12.7mm round only multi tool punches, strippers, and Slug Free® dies.
- Download product bulletin ( 220 kb )
 Mate’s XMT24A two-piece adjustable length 24mm punches continue Mate’s tradition of innovative, high performance tooling.
- Adjust punch length in 0.039(1.00) increments simply by rotating the punch head
- Punch head made from aircraft-grade steel
- Combining XMT24A’s standard high speed steel punches with the length adjustment, grind life can be tripled.*
- Fully compatible with all Euromac XMTE6 and XMTE10 multi tools.
- Download product bulletin ( 288 kb )
* Actual grind life may vary, and depends on type of material and material thickness punched.
Punches: All XMT punches are made from premium high speed tool steel for exceptional interval between regrinds. 1/4 degree back taper and near polished flanks to reduce friction and eliminate galling. Minute corner radii to reduce chipping. Hardened and ground D-shaped pin for precise punch orientation.
Strippers: Hardened for less wear and resistance to punch galling. Tight clearance for better punch guiding; 0.0017(0.04) for shapes, 0.0025(0.06) for rounds.
Dies: Highly wear resistant, chrome air hardened tool steel with optimum balance between hardness and toughness. SLUG FREE® die geometry eliminates slug pulling. Uniform clearance radii in die corners to improve piece part quality. Shaped dies keyed. 0.059(1.50) grind life, with shims also available. Superior roundness and flatness with exceptional die strength.
Ordering Information:
| Euromac Multi Tool |
XMTE10 |
XMTE6 |
XMTE4 |
| XMT 12.7mm |
XMT 24mm |
XMT 24mm |
XMT B Station |
| Stations |
8 |
2 |
6 |
4 |
| Maximum Punch Diagonal |
0.500(12.70) |
0.945(24.00) |
0.945(24.00) |
1.250(31.70) |
| |
| Round Tooling |
|
|
|
| XMT™ Punch |
PAXA0A |
PLXZ0A |
PAXZ0A |
PAUB0A |
| Punch Head |
N/A |
MATE01901 |
MATE01901 |
N/A |
| XMT™ Stripper |
S6XA0A |
S6XZ0A |
S6XZ0A |
S6XB0A |
| Slug Free® Die |
D0XA0A |
D0XZ0A |
D0XZ0A |
D0AB00 |
| |
| Shaped Tooling |
|
|
|
| XMT™ Punch |
PAXA_A |
PLXZ_A |
PAXZ_A |
PAUB_A |
| Punch Head |
N/A |
MATE01901 |
MATE01901 |
N/A |
| XMT™ Stripper |
S6XA_A |
S6XZ_A |
S6XZ_A |
S6XB_A |
| Slug Free® Die |
D0XA_0 |
D0XZ_0 |
D0XZ_0 |
D0AB_0 |
| |
| Accessories |
|
|
|
| Die Shim Pack |
MATE01130 |
MSFZ |
MSAB |
For more information about tooling to suit Euromac punch presses, please visit www.mate.com/euromac
Dimensions in inches(millimeters). |
